How to Setup TP-Link AC750 WiFi Range Extender RE220 through Web Browser?

  • For TP-Link RE220 Extender Setup, first of all, you need to Plug in your extender near your router. It can be in the same room.
  • Wait until the Power LED on the Range Extender Turns solid. Once we have a solid green light then it means its ready for Setup.
  • Now grab any of your devices like computer, laptop, cellphone, i-pad, etc for Setup.
  • Connect your device to your Extender’s default Network name.
    NOTE:- You can do that by going to the settings on your phone then to WiFi and selecting your Extender default name over there. On your desktop, you need to click on WiFi icon on the lower right-hand corner and select TP-Link Extender default name over there.
  • Once connected to default TP-Link Extender Network open a browser like (google, safari, firefox or Internet Explorer).
  • Now in the URL of your Browser, you need to type in the TP-Link Offline page Setup Address i.e. tplinkrepeater.net or tplinkrepeatersetup.com or 192.168.0.254
TP-Link RE220 Extender Setup
TP-Link RE220 range extender setup

NOTE:- In case the page doesn’t come up Reset your TP-Link RE220 Range Extender and try to follow the steps again.

  • It will now ask you to create a Login password for management purpose, you can create any password you wish for.
  • Your TP Link AC750 WiFi range Extender will now scan for all the available networks in your area.
  • You need to select your main WiFi network name among the list of all the available network.
  • Punch In the Password for the selected 2.4 GHz networks.
  • Repeat the same process for 5GHz network, skip this part in case your Router doesn’t support 5GHz network.
  • Now you will have to confirm your Host Network name and password.
  • Once confirmed in the very next step you can change your Extender’s name or you can keep the default one.
    NOTE:- After Setup the extender picks up the same network as your Router. For instance, if your Host network name is ABC, then your extender’s network name will be ABC_EXT.
  • The TP-Link RE220 Extender will now Reboot, it takes around 90 seconds for that.
  • Once Rebooted, unplug the Extender and place it away from the router.
  • For best Internet Connectivity place the extender halfway between your Router and the place where you need Internet connectivity.
    IMP:- Place TP-Link RE220 Extender away from big appliances because they hinder the Internet connection from Range Extender.

How to Setup TPLink AC1200 RE300 WiFi Range Extender?

This range extender supports the dual band WiFi with AC1200 speed, Tp Link RE300 Enable one mesh technology with compatible TP-Link Archer A7 router. In order to enable one mesh update the A7 firmware to the latest version. One mesh creates a mesh Wi-Fi network that covers your home in fast, seamless Wi-Fi. It can be easily Setup through Tether App or through WPS too. Its smart Signal Indicator is used to find the best place for its optimal Internet connectivity. This Re300 TP-Link Extender comes with Adaptive path selection navigates the repeater to the fastest connection path and paired with high-speed mode, you easily stream HD videos as well as HD games.

TP-Link RE300 Setup
TP-Link RE300 Extender Setup

SPECIFICATIONS:-
Compatible with all
This TP-link RE300 range extender is compatible with all latest routers, access points, as well as ISP gateways.
Smart Signal Indicator
An Intelligent Signal Indicator directs you to the best location to place your range extender for the fastest Internet Speed.
Easy WPS Setup
With just one Push you can Setup your TP-Link Extender through WPS compatible routers.
Manage through Tether
It hardly takes a minute to setup range extender with the help of the Tether App.
TP-Link One Mesh
This range Extender is made to work as a mesh network to work with a single WIFi Network name. You can easily connect this range extender with TP-Link Archer A7 router.

TP-Link AC1200 RE300 Setup:-

  • Firstly plugin the Tp-link RE300 range extender into a wall outlet close to your router.
  • Wait until the LED light on the WiFi range Extender turns solid.
  • Open your TP-Link tether app.
    NOTE:- click here to download the tether app for Android | for iOS.
  • Now go to the WiFi list on your device and connect to default WiFi name(SSID) of your Tplink range extender i.e. TP-Link_Extender.
  • Launch the Tether App and click on the TP-Link ac1200 re300 extender.
  • It will ask you to create a password to log in into your device.
  • Your extender will now scan for all the available networks in your space.
  • Select your 2.4GHz host network and type in the password and hit NEXT.
  • Likewise, you need to do the same for the 5GHz network too.
    NOTE:- you can skip the step if your router doesn’t support 5GHz.
  • In this step, you can change the default extender network name as you like.
  • Moreover, Your tp-link RE300 range extender will now reboot itself, which means you will see some changes in the lights.
    Note:- It takes around a Minute for extender to reboot properly.
  • Relocate the TP-Link RE300 extender.
    IMP:- For Best Results.
  • Plug in your range extender, for example, you can do it halfway between your router and the place where you need the Internet.
  • Place the RE300 in an open area.
  • Keep the extender away from the large appliances.
  • Lastly, You can also Setup your device through tplinkrepeater.net or http://tplinkrepeater.net.

How to Setup Tp Link N300 WiFi Range Extender TL-WA855RE?

TP Link N300 extender Boosts your Internet amazing performance and wide coverage in your entire home or office. Its easy setup helps you to expand your wireless Internet at a push of the WPS button. It is compatible with any Wi-Fi router or wireless access point. Its rival NETGEAR N300 extender (EX2700) is also a great product but with a higher price. The TL-WA855RE works best with routers that support N300 WiFi and above. Before we Setup of TP-Link TLWA855RE Range extender, we should get familiar with the LED lights on our device.

Understanding Light Status Before setup

Flashing green:- Extender is booting up.
Red:- Range Extender is ready for Setup.
Green:- Setup is complete.

Understanding Light Status After setup:-

Flashing Green:- Extender is paring to the router.
Red:- Paring failed and not detecting any signal.
Orange:- Pairing successful but the signal is weak.
Green:- pairing successful and signal is good.

tplinkrepeater.net tplink N300 setup
TP Link N300 Range Extender TL-WA855RE Setup

Tplinkrepeater N300 Setup

  • Firstly, Plug in your Range Extender into a wall outlet near your router.
  • The LED light on your extender will flash green, which indicates it is turning on.
  • As soon as the light on your extender turns red it means your range extender is ready for Setup.
  • Now you need to open WiFi list on any of your device like laptop, computer, desktop, cellphone or tablet.
  • In your WiFi list, you will have to select your TP Link extender network it will show up there as “TP Link TLWA855RE“.
  • In this Step, you need to type tplinkrepeater.net in the URL or address bar of your browser(google, firefox, edge, etc) and hit enter.
  • It will now take you to your Tp Link N300 Setup Page.
  • Moreover, To login into your Range extender use “Admin” for both Username and Password Fields.
  • Most likely, To maintain your security it will ask you to change your default Username and Password.
  • The very next Step involves you to select your main router network among the list of all the available networks.
  • And you need to punch in the Router Password for your selected network name and hit Next.
  • Here, we recommend you to change the default SSID of the TP Link Extender and Rename it something different than your Router’s SSID.
  • After Verifying your Settings click save.
  • It takes around 60 seconds (depending upon your router speed too) for extender to Setup.
  • Once done it will show you a congratulations display, you need to hit finish there.
  • Once Properly Setup the LED on the TL-WA855RE will turn solid green. You can unplug the extender now.
  • Lastly, Place it halfway between your router and the actual place where you need the internet.

Upgrade the Firmware of your TP-Link Router?

Latest Firmware for your router assures that we have no or least bugs plus highest possible network security. With the newest TP-Link firmware, TP-Link makes sure Smooth Network Experience for you all. Once you Login into your Router you will be notified for the latest firmware available on the router page itself. Moreover, the latest firmware is also available at the TP-Link website www.tp-link.com, and you can download it from the Support page for free.

NOTE:- No USB device should be plugged in the router while you update the firmware to prevent data loss.

IMP:- You should Backup the present configuration of your router before updating the firmware.

IMP:- Make sure not to turn off the router while you upgrade the firmware.

Tp-Link Router Firmware Upgrade
Tp-Link Router Firmware Update

You can also Update the Firmware Online

  • You just need to open the Link http://tplinkwifi.net in your browser, and hit login and type your TP-Link ID or the password of the router.
  • Once the latest firmware is available for your Tp-Link router, It will be shown in the top-right corner of that page. You just need to click that icon and go for the latest upgrade for your router.
    Or, you can go to Advanced > System Tools > Firmware Upgrade, and click
    and see if any upgrade is released or not.
  • Under the Online Upgrade, section hit on Upgrade.
  • Now you just need to wait, you will see some changes in the light of the router. Wait till all the lights are stable and the Router reboots properly.
    IMP:
    Always Keep the latest firmware for your router. It helps in keeping your experience smooth and bug-free. It is also important for security concern too. If there is any essential firmware update for your router, you will see the pop on your router page as you login into your router’s browser page. You just need to hit Upgrade now and log into the router’s web management page and Login into your router with the help of username and password you set for the Tp-Link router.

Upgrade TP-Link Router Firmware Manually

  1. Visit the website www.tp-link.com latest firmware file for the router from www.tp-link.com.
  2. Open the website http://tplinkwifi.net, and Login into your account using TP-Link ID or the password you set for the router.
  3. Go to Advanced > System Tools > Firmware Upgrade.
  4. You need to make sure your downloaded the latest firmware and that too for that correct model number of the router you have.
  5. Hit Manual Upgrade section. Search or Browse to locate the downloaded new firmware file, and click Upgrade.
  6. Now you just need to Wait a few minutes till the firmware is complete and a reboot is complete too.

Manage the TP-Link router with Tether APP?

One can Install the TP-Link Tether App from Play store or App store into your phones or tablets.
Click here to download the Tether App for Android || for IOS.
This App will help you change settings on your router locally and remotely.

Locally Managing Router with the help of Tether App

  1. Open Setting on your phone or tablet, go to wireless and connect your phone to your Router’s Network.
  2. Once connected, Launch the Tether app, select the model of your router.
  3. It will now ask for TP-Link username and password that you will need to punch in.
  4. The Main home settings page will show you internet status and attached devices or you can click on different settings according to your need.
tp-link app and uses
Tp-Link Tether App

Managing Your Router with the help of Tether App
Things required for TP-Link tether app are:-

  • Firstly, Make sure you have Tether app with the newest version. You can update the app by going online in Play store or App store and searching for TP-Link tether app.
  • TP-Link Cloud router with the latest firmware. Refer to Upgrade the Firmware to update your router to the latest firmware version.
  • A TP-Link Username and Password of your Router. In case you don’t have one, you can create it by registering your device.
  • Moreover, You should have Internet on your cell phone or Tablet, that can be a Wifi or cellular data.
  • To remotely access your router with the help of Tether App:
  1. First of all, Open the TP-Link app. click on the top-left corner of the screen and hit log in.
  2. Type-in the username and password for your TP-Link account and hit Login.
  3. Among the list of Routers select Router, you have in your home.
  4. Lastly, the home page will show you your internet status and attached devices.

How to configure TP Link RE200 Range Extender?

RE200 TP Link Range Extenders is amazingly fast performing device available in the market. Follow the setup process through Browsers like google, firefox, or safari. In this article, we will learn the setup of TP-Link Extender through Browser Method.

TP-Link RE200 Range Extender Setup
TP Link RE200 AC750 Range Extender Setup
  • firstly make sure your range extender is within the range of your router. For Installation purpose, this can be in the same room or minimum of 15 to 20 feet.
  • Now connect your computer or cell phone to your extender.
  • click here to open TP-Link range extender setup page tplinkrepeater.net.
  • It will ask you for Username and Password which is “admin” in both the cases and hit log in.
  • First-time users will need to create a new username and new password for your TP-Link range extender account.
  • Now select the REGION and click Next.
  • Since RE200 is dual band Range Extender it will start scanning all the available network in your area and you will have to choose the 2.4GHz network and 5GHz that you want to extend.
  • Punch in the password for your 2.4GHz network and repeat the same process for your 5GHz Network and type in the password.
    IMP:- In case your router doesn’t support 5GHz you can simply skip the step by hitting the “Skip” button on the lower right-hand corner.
  • Once the Tp Link extender is configured on 2.4GHz and 5GHz it will show you the next page where you can edit SSID of your 2.4GHz and 5GHz network of TP LInk RE200 range extender.

Note:- As we setup the TP Link RE200 range extender it automatically picks up the same SSID as your router. This will help you to experience “Roaming Network”, which is useful in automatically switching between the best available network of your Router and Extender.

  • You can also Change SSID of Range Extender according to your needs, but in that case “Roaming Network” won’t work. Then you will have to manually select the available networks from your WiFi list according to their signal strengths.
  • It will then show you the summary page, click on “Finish” when all the configuration looks fine to you.
  • Now, Tp Link RE200 Range Extender will reboot itself, it takes a minimum of 60 seconds for that. Once configured you can unplug it and place it to the location where you need extended WiFi signals.
    Note:- Try to place RE200 in direct line of sight of the router if possible for better WiFi coverage.
  • Just by looking at the 2.4GHZ and 5GHz lights on the extender you can make sure if the extender is connected properly or not to the router.
  • Note:- These instructions are applicable for the Setup process of TP Link RE200 and RE210 TP Link Range Extenders.

How to configure TP Link RE450 Range Extender?

RE450 TP Link Extenders are one of the best performing devices available in the market. Extender Setup is easier through Browser method (Google, Firefox, or Safari) or we can do it through WPS too. In this article, we will learn the Setup of TP-Link Extender through Browser Method.

Steps to follow:-

  • first and foremost make sure you’re extender is within the range of your router. They can be in the same room or minimum 15 to 20 feet apart for the setup process.
  • Now connect your devices to your extender.
  • click here to open TP-Link extender setup page tplinkrepeater.net .
  • It will prompt you for Username and Password which is “admin” in both the cases and hit log in.
  • In case you are setting it up for the first time, it may ask you to create a Username and Password for your Account.
  • Now select the REGION and click Next.
  • Then TP Link RE450 extender will start scanning all the available network in your area, you will have to choose the 2.4GHz network you want to extend punch in the password.
  • Repeat the same process for your 5GHz Network and type in the password.
    IMP:- In case your router doesn’t support 5GHz you can simply skip the step by hitting the “Skip” button on the lower right-hand corner.
  • Once the extender is working on 2.4GHz and 5GHz it will show you the next page where you can edit SSID of your 2.4GHz and 5GHz network of TP-LInk RE450 extender.
TP-Link RE450  Extender Setup through tplinkrepeatersetup.com
TP-Link RE450 Extender Setup

Note:- As we Setup the TP Link RE450 extender it automatically picks up the same SSID as your router. This will help you to experience “Roaming Network”, which is useful in automatically switching between the best available network of your Router and Extender.

  • You can also Change SSID of Extender according to your needs, but in that case “Roaming Network” won’t work. Then you will have to manually select the available networks from your WiFi list according to their signal strengths.
  • It will then show you the summary page, click on “Finish” when all the configuration looks fine to you.
  • Now, Tp-Link RE450 Extender will be reboot itself, it takes around a minimum of 60 seconds for that. Once configured you can unplug it and place it to the location where you need extended WiFi signals.
    Note:- Try to place RE450 in direct line of sight of the router if possible for better WiFi coverage.
  • Just by looking at the 2.4GHZ and 5GHz lights on the extender you can make sure if the extender is working properly or not.
  • These Installation steps can be used for the following models TP-Link RE450, RE580D, RE590T, TL-WA850RE_V2, TL-WA854RE_V2, TL-WA860RE_V2,TL-WA830RE_V3 Models.

How to Setup TP Link AV600 Powerline Adapter?

Powerline Ethernet Adapter becomes a useful tool when we have to extend WiFi signals to comparatively bigger distances. They provide Relatively high-Speed Internet Connection as compared to the Wi-Fi because of their Ethernet type Connection.
Powerline Adapters come with two units, the first one is the “Base” unit and the second one is the “Remote” unit. TP-Link provides a whole range of Powerline adapters. Some of the common model numbers are AV2000, AC1750, AV1200, AV600, AC750, etc. Follow the steps below for TP Link AV600 Setup.

TP Link AV600 Setup
TP Link AV600 Powerline Ethernet Adapter Setup

Setup TP Link AV600

  • Plugin the Base Powerline Adapter close to your Router and connect an Ethernet cable from LAN port on your Router to the Ethernet port on the Base unit. Do not plug the powerline adapter into a power strip, extension cord, or surge protector.
    Note:- Ethernet cable is provided along with Powerline Adapters.
  • Now plug in the “Remote” Unit in the area, where you need WiFi Connection.
  • Wait till Light becomes stable.
  • Now push the PAIR button on your “Base” Unit.
  • Within 60 seconds Push PAIR button on your “Remote” unit.
  • Wait till you see a fast flashing light on your Unit.
  • Once configured you can connect Ethernet cable from “Remote unit” to any of your devices like Laptop, Playstation, etc to experience the high-speed Internet.
  • TP-Link Powerline Adapters are plug and play devices, follow the above-mentioned steps and you will be good to go.
  • IMP: Press and hold the PAIR button for about 8 seconds to leave the existing powerline network. Press and hold the button for more than 15 seconds to reset the powerline adapter to factory defaults or you can setup it using tplinkrepeater.net.

How to Setup TP-Link Deco Whole Mesh?

Tp-Link Deco is the answer to your WiFi related troubles in your big house or office. You can use TP-Link Deco units anywhere in your area, giving you non stop high-speed internet.
Configuration of Deco is simplest with the help of “deco mobile app“, available in Android and IOS
Steps to be followed for Tp-Link Deco System Setup are:-

Tp-Link Deco System Setup
TP-Link Deco Home Mesh WiFi System Installation
  • Firstly, Open Deco app on your device.
  • Login on tplinkrepeater.net or signup into your TP-Link account.
  • Tap “let’s begin”, and select deco according to your model number.
  • Unpack all the parts of the Deco and click Next.
  • Unplug Modem from power.
  • Connect your Deco unit with an ethernet cable to your Modem, and power on both the devices.
  • Wait till Internet Led is stable on the modem and then click NEXT on your Deco APP.
  • Turn on Bluetooth on your Smartphone and wait till the light turns blue on Deco.
  • Your Bluetooth will show you your Deco and will secure connection with it.
  • Select your Deco room.
  • Moreover, It will now ask you to select your Internet Connection type, click “Next” or consult your ISP.
  • Create a Network Name and Password for your Network.
  • Lastly, you can select “I’m Okay For Now” or “Add Another Deco”.